banner Functional vacuum coatings on machine parts and tools
   
mills broaches perforation toos drill bits hard carbide inserts Shaper cutters Threading tools
 

broaches

 
Coatings on cutting tools by "Nanotechnology"

Hard wearproof coatings on hard carbide inserts

 

(monolayer, multilayer, nanostructured, gradient).

Main coatings characteristics

Microhardness 25000-45000 MPa

Thickness 1-5 mkm.

Surface rouhness not less than base.

Vivid adhesion with base.

Friction coefficient – 0,3 – 0,6.

Thermal Stability – up to 900°Ñ.

 

coated carbide cutting inserts

 

 

Comparative tests of hard carbide cutting inserts under production conditions have shown, that on identical modes of high-speed machining deterioration of teeth covered nanocomposite coatings on the technologies developed by scientific and technological centre " Nanotechnology ", in 2,6-4 times it is less, than not covered.

 

 

 coated carbide cutting inserts

VPN - 2n coated cutting inserts

     

 

     

   

 

     

   

 

     

   

   

Our coatings are successive on such tools

Milling cutters and hobbs

Cutting teeths

Carbide cutting inserts

Broaches

Taps and threading tools

shaper cutters and rams

 

 

 

 

Deposition of strengthening coatings on regrinding standard all-metal and hard-carbide  cutting teeth of domestic and foreign manufacturers (firm FRAISA, HANITA, PLATIT, CARLOY  etc.)

Deposition of strengthening coatings of various compositions on non standart tools and furniture.

Development new and modifying of the existing coatings under concrete conditions of use of the tool and special tools and furniture.

 

 

 

 

 

 

 

Îñîáåííîñòè íàíîïîêðûòèé

Complex coating methods includingCVD, PVD, ion implantation are united in single technological cycle.

Our coatings have nanolayer structure and are composed from layers on the base of Al, Ti, Cr, Zr, Mo, and their compounds with N, C, O in different compositions. Thickness of each layer is approximately ~ 5-10 nm.

Microhardness 25000-45000 MPa (in accordance with coating composition).

Low temperature deposition processes of coatings with good adhesion to base (T≤120-computer controlled ).

Automated data acquisition and control system allows us to manage basic technological parameters in a very precise way.

 

 

 

Typical journal automation control system of installation

 

 

 

 

Coated carbide cutting inserts

 

Rambler's Top100 ?????????? ???????
?????????? ??????? footer Nanotechology web site

General informationCoatings application by industryCoatings on toolsCorrosion protection coatingsHigh temperature coatingsCoated Diesel Engine PartsPhotos of coatingsCoatings properties

 


2000-2012 STC Nanotechnology

Main PageCoated tools

SOFC

Coated tools: millsbroachespunching/perforation toolsdrillsinsertscutting teethsrams (shaper cutters) threading tools

Coated high temperature furnances: crucibles, stirring rods, fittings

Coated corrosion protected items

Coated diesel engine parts

Coated turbine parts

coatings tribological properties

Coatings application in Aviarion

 


Rambler's Top100 ?????????? ???????
?????????? ???????

 

free counters
Free counters